A smooth, permeable finish with a wide choice of aggregate colours. Compare up to 3 free quotes for resin bound driveways from local installers across Sussex.
A resin bound driveway is made by mixing natural aggregate with clear resin and trowelling it out to a smooth, even finish. The result is a seamless surface without joints, and the wide range of aggregate colours means it can be matched to a flint cottage in rural East Sussex as easily as to a newer home on the coast. Because the stones are fully coated and bound together, a well laid resin bound surface does not scatter loose gravel across the drive.
The main practical advantage of resin bound is that it is permeable when laid on a suitable base, so rainwater soaks through rather than running off onto the pavement. In England, permeable surfaces of any size do not need planning permission for a front driveway, whereas an impermeable front drive over 5 square metres does unless it drains to a lawn or border. Rules differ for flats, conservation areas, listed buildings and areas under an Article 4 Direction, so read our guide to driveway planning permission and check with your council.
We pass enquiries to resin driveway installers working across Brighton, Worthing, Eastbourne, Hastings and the surrounding areas. The quality of a resin surface depends heavily on the base it sits on, the mix of resin and aggregate, and the skill of the person laying it, and the weather on the day matters too. When you compare quotes, ask each installer what base they propose, which resin and aggregate they use and how they will prepare the edges.
These two systems are often confused but work in quite different ways. With resin bound, the aggregate is mixed with resin before laying, which gives a smooth surface that can let water drain through when it sits on a permeable base. With resin bonded, a layer of resin is spread over an existing surface and loose aggregate is scattered on top, giving a textured, gravel-like finish. Resin bonded is not permeable in the same way, and some loose stones may come away over time. Less.co.uk prices resin bonded on an existing surface at £30 to £50 per square metre, against £40 to £55 for standard resin bound before base preparation, so it is worth asking installers to quote for the system that suits your drive rather than simply the cheaper one.
Less.co.uk puts resin bound at £40 to £55 per square metre for standard natural stone, or £55 to £70 for premium quartz or marble, before base preparation. A new base adds £25 to £45 per square metre on its figures, which is why a 40 square metre drive costs £1,600 to £2,800 laid on a sound existing base but £2,600 to £4,600 with a new base. MyJobQuote gives a broader £60 to £95 per square metre, including labour, and puts a 60 square metre drive at £3,500 to £5,500.
These are national guide figures rather than Sussex prices, and the sources measure slightly different things, so treat them as a starting point. An installer will need to visit to check whether your existing surface can take an overlay, how the drive will drain and whether any edging or groundwork is needed. Ask for a written quote that sets out the base, the aggregate and any extras so you can compare like with like, and see our resin driveway cost guide for more detail.
Permeable
Laid on a suitable base, water drains through the surface, which helps avoid puddles and run-off onto the pavement.
Low maintenance
There are no joints for weeds to root in, so regular sweeping and an occasional gentle wash are usually enough.
Smooth surface
The bound finish has no loose stones, which makes it comfortable underfoot and easy for pushchairs and wheelchairs.
Colour choice
Aggregates range from natural gravels to quartz and marble, so the finish can be matched to the house.
Overlay option
Where an existing tarmac or concrete base is sound, resin bound can often be laid over it, which reduces groundwork.
Clean finish
The seamless surface suits both modern homes and period properties, and can be edged in block or stone.
Less.co.uk (April 2026) puts resin bound at £40 to £55 per square metre for standard natural stone, or £55 to £70 for premium quartz or marble, before base preparation. MyJobQuote (October 2026) gives a broader £60 to £95 per square metre, including labour.
Often it can, if the existing tarmac or concrete base is sound. Less.co.uk (April 2026) gives £1,600 to £2,800 for a 40 square metre drive on a sound existing base, against £2,600 to £4,600 where a new base is needed, so ask an installer to check your current surface.
Resin bound mixes the aggregate with resin before laying, giving a smooth surface that can drain through on a permeable base, while resin bonded scatters loose stones onto a resin coat and is not permeable in the same way. Less.co.uk (April 2026) prices resin bonded on an existing surface at £30 to £50 per square metre.
MyJobQuote (October 2026) gives £3,500 to £5,500 for a 60 square metre resin driveway. Our resin driveway cost guide notes that MyJobQuote does not price excavation and sub-base work into these totals, which will add significant costs where a new base is needed.
The Planning Portal says a new or replacement front driveway of any size does not need permission if it uses permeable surfacing, and resin bound is permeable when laid on a suitable base. Rules differ for flats, conservation areas, listed buildings and areas under an Article 4 Direction, so check with your council.
Fill in the form or call 01273 115520, and up to 3 local installers will be in touch. It is free and there is no obligation.
We use essential cookies to make this site work. With your permission, we would also like to use Google Analytics cookies to understand how people use the site so we can improve it. We do not use advertising cookies. You can change your mind at any time using the cookie settings button. Read our cookie policy for more information.