Lift moss, algae, oil and built-up grime from your driveway. Compare up to 3 free, no-obligation quotes from local cleaners and driveway installers.
Over time, even a well laid driveway picks up dirt, algae, moss and oil stains that make the front of a house look tired. A thorough clean can bring back much of the original finish of block paving, resin, tarmac and concrete, and it is worth asking any cleaner which pressure and products they plan to use on your surface. That matters, because using a pressure washer too close or at too high a setting can damage some surfaces and wash out jointing sand.
We do not clean driveways ourselves. We pass your enquiry to up to 3 local cleaners and driveway installers across Brighton, Worthing, Eastbourne, Hastings and the rest of East and West Sussex, and they will be in touch to arrange a quote. You can then compare what each one offers, including pre-treatment, stain removal and re-sanding, before you decide.
A dirty driveway is more than an eyesore. Moss and algae can make the surface slippery, especially in wet weather. Organic matter that builds up between block paving joints encourages weeds and can loosen the jointing over time. Oil and rust marks that are left untreated are often harder to shift the longer they sit.
A thorough clean deals with the surface dirt and the growth behind it, and should leave your driveway looking far fresher. Many homeowners follow a clean with driveway sealing, which can help the surface resist staining and keep jointing sand in place. If you only need a quick wash of paths or a patio as well, our page on pressure washing covers that too.
A good cleaner starts by looking at the surface type, the kind of staining or growth (algae, moss, lichen, oil, rust or tyre marks) and the condition of the joints and edging. This decides which method and pressure are safe for your driveway.
Moss, algae and lichen are often treated with a biocide before washing. This works on the growth itself rather than only blasting off the surface layer, so it tends to take longer to come back.
Many cleaners use a rotary surface cleaner rather than a handheld lance, because it gives more even coverage with less risk of striping. Block paving, resin, tarmac and concrete each need a different approach and pressure.
Oil, rust and tyre marks usually need targeted cleaning products rather than water alone. Some stains will lighten rather than disappear completely, so ask what result to expect before work starts.
Washing block paving flushes out some of the jointing sand. Re-sanding afterwards helps keep the blocks stable and makes it harder for weeds to take hold, so check whether it is included in each quote.
MyJobQuote puts cleaning a 30 square metre drive at £100 to £160 and a 60 square metre drive at £150 to £250, or £300 to £450 for a 60 square metre drive cleaned and sealed. MyBuilder gives £2 to £5 per square metre for a drive in standard condition and £4 to £8 per square metre for heavy soiling, or £150 to £250 for a drive of 30 to 50 square metres.
The price for your driveway will depend on how much moss and algae there is, whether stains need specialist treatment, how easy it is to get equipment to the drive and whether block paving needs re-sanding afterwards. MyJobQuote notes that heavy staining can add £50 to £100.
Ask each cleaner for a written quote that lists what is included, so you can compare like with like. Our driveway cleaning cost guide goes into more detail.
We pass driveway cleaning enquiries to local cleaners and installers across Sussex, including Brighton and Hove, Worthing, Eastbourne, Hastings, Crawley, Horsham, Haywards Heath, Lewes, Shoreham, Littlehampton, Bognor Regis, Chichester and the surrounding areas.
MyJobQuote (checked October 2026) puts cleaning a 30 square metre drive at £100 to £160 and a 60 square metre drive at £150 to £250. MyBuilder gives £2 to £5 per square metre for a drive in standard condition and £4 to £8 per square metre for heavy soiling.
They can. MyJobQuote says heavy staining can add £50 to £100 and that pre-treatment costs £2 to £5 per square metre, and some oil, rust and tyre marks will lighten rather than disappear, so ask what result to expect before work starts.
Washing block paving flushes out some of the jointing sand, and re-sanding afterwards helps keep the blocks stable and makes it harder for weeds to take hold. MyJobQuote prices re-sanding at £2 to £3 per square metre, so check whether it is included in each quote.
MyJobQuote gives £300 to £450 for cleaning and sealing a 60 square metre drive. MyBuilder gives £6 to £10 per square metre to re-sand and seal block paving.
Yes, but carefully. Our driveway cleaning cost guide explains that a narrow, high pressure jet held close to the surface can loosen stones, so a wider fan at a sensible distance is safer, and strong solvents can attack the resin binder.
Fill in the form or call 01273 115520, and up to 3 local cleaners will be in touch. It is free and there is no obligation.
We use essential cookies to make this site work. With your permission, we would also like to use Google Analytics cookies to understand how people use the site so we can improve it. We do not use advertising cookies. You can change your mind at any time using the cookie settings button. Read our cookie policy for more information.