Compare up to 3 free quotes from local driveway installers for block paving, resin bound, tarmac and dropped kerbs across Brighton and Hove. It is free and there is no obligation.
The first question for most Brighton driveways is not which material to use but whether there is room to park at all. Much of central Brighton is made up of Victorian and Edwardian terraces in areas such as Hanover, Seven Dials and Kemptown, where front gardens are shallow or missing altogether. Before any surfacing is worth pricing, the space in front of the house has to be deep and wide enough for a car to sit off the pavement, and you will almost always need a dropped kerb to reach it legally. The city is also built on steep hills, so many front plots slope towards the house or the road, and that makes drainage a design issue from the start.
Further out, the picture changes. Suburbs such as Patcham, Hollingbury, Woodingdean and Rottingdean have more inter-war and post-war semis and bungalows with wider front gardens, where a two-car driveway is often realistic. Homes close to the seafront are exposed to salt spray and strong winds, so it is worth asking each installer how their chosen surface and edging will cope with that exposure over time.
We connect you with up to 3 local driveway installers who will look at your property and give you a written quote. You can compare them side by side and choose the one that suits you, or none at all. Services covered include block paving, resin bound driveways, tarmac, patios, dropped kerbs, driveway cleaning and driveway sealing.
Block paving suits the small, often irregular front plots found across Brighton because it can be cut neatly around boundary walls, steps and manholes. Individual blocks can be lifted and relaid if a utility company needs to dig or a section settles. Permeable block paving lets rainwater soak through the joints, which helps a front driveway stay within the planning rules on drainage.
Resin bound surfacing gives a smooth, even finish that works well on the short, steep approaches common on Brighton hillsides. A properly laid resin bound surface is porous, so water drains through it rather than running across it towards the pavement or the house. It needs a sound, well prepared base, and an installer will tell you whether your existing surface is good enough to lay over.
Tarmac is a practical choice for wider plots in the suburbs such as Patcham, Hollingbury and Woodingdean, where there is room for a larger parking area. It is hardwearing and quick to lay, and it is often finished with a block paving edge for a neater look. Standard tarmac is not porous, so on a front garden over 5 square metres it needs drainage to a lawn or border, or a porous mix.
Pattern imprinted concrete is poured as a single slab and stamped to look like setts, cobbles or stone. It gives a seamless surface with no joints for weeds to grow through, although it is harder to patch invisibly if it cracks. Like tarmac, it is not porous on its own, so ask how rainwater will be dealt with before you choose it.
In Brighton and Hove, dropped kerbs are handled by Brighton and Hove City Council. You apply for permission first, and if it is granted your contractor applies for a licence to build the crossover. The council asks for a hardstanding at least 4.5 metres long at right angles to the road and at least 2.75 metres wide, and a visibility splay kept clear of anything over 0.6 metres high. Applications within 1 metre of a street tree go to the council's tree team, who may refuse them. The council's own page also says your contractor must hold New Roads and Street Works Act accreditation and at least £10 million public liability insurance.
Brighton and Hove City Council lists a stage 1 fee of £182.60 and, if permission is granted, a stage 2 fee of £545.60. Both are non-refundable, the council says fees rise on 1 April every year, and its page shows no update date, so check current fees with the council before you apply. These fees are separate from what you pay your contractor, and from any planning fees. Our guide to dropped kerb rules explains the process in more detail. Peacehaven, Newhaven and Lewes sit in East Sussex, where East Sussex County Council handles dropped kerbs instead.
For the driveway itself, GOV.UK guidance says a new or replacement front driveway covering more than 5 square metres needs planning permission only if it is impermeable and the rainwater does not drain to a lawn or border. Porous surfaces such as permeable block paving, resin bound or gravel do not need permission on those grounds. Different rules apply to flats and maisonettes, and much of central Brighton lies in conservation areas, so check with Brighton and Hove City Council before you commit to a design. No one can promise that permission will be granted.
Published price guides are national rather than specific to Brighton, so treat them as a starting point. Less.co.uk (April 2026) puts a 40 square metre resin bound driveway at £1,600 to £2,800 on a sound existing base, or £2,600 to £4,600 where a new base is needed. The same source gives installed block paving at £70 to £120 per square metre, with a 40 square metre drive averaging £3,800. For tarmac, Less.co.uk gives £40 to £60 per square metre for a full dig-out and re-lay, and £20 to £40 per square metre for an overlay. It puts pattern imprinted concrete at £60 to £100 per square metre.
On a Brighton site, the details often matter more than the headline rate. Narrow streets can make skip and lorry access harder, steep plots may need extra digging or drainage, and a dropped kerb adds both council fees and construction costs. Comparing up to 3 written quotes is the clearest way to see how each installer has priced these factors for your property. Our cost guides for resin driveways, block paving and tarmac driveways go into more detail.
Hove
Portslade
Patcham
Hollingbury
Woodingdean
Rottingdean
Saltdean
Peacehaven
Lewes
Newhaven
Brighton and Hove City Council asks for a hardstanding at least 4.5 metres long at right angles to the road and at least 2.75 metres wide. A visibility splay must also be kept clear of anything over 0.6 metres high.
Brighton and Hove City Council lists a stage 1 fee of £182.60 and, if permission is granted, a stage 2 fee of £545.60. Both are non-refundable, the council says fees rise on 1 April every year and its page shows no update date, so check current fees with the council before you apply.
The council does not build crossovers itself. Its page says your contractor must hold New Roads and Street Works Act accreditation and at least £10 million public liability insurance, and the contractor applies for a licence once permission is granted.
GOV.UK guidance says a new or replacement front driveway over 5 square metres needs planning permission only if it is impermeable and the rainwater does not drain to a lawn or border. Much of central Brighton lies in conservation areas and flats follow different rules, so check with Brighton and Hove City Council first.
Published guides are national rather than specific to Brighton. Less.co.uk (April 2026) puts a 40 square metre resin bound driveway at £1,600 to £2,800 on a sound existing base, or £2,600 to £4,600 where a new base is needed.
We use essential cookies to make this site work. With your permission, we would also like to use Google Analytics cookies to understand how people use the site so we can improve it. We do not use advertising cookies. You can change your mind at any time using the cookie settings button. Read our cookie policy for more information.