Block paving driveways in Sussex

A hardwearing, repairable driveway surface available in a wide choice of colours and patterns. Compare up to 3 free quotes from local block paving installers across Sussex.

Block paving driveways across Sussex

Block paving is a long-standing favourite for Sussex driveways because it combines strength with flexibility. Individual blocks can be replaced if they are damaged, the surface can be lifted for utility work and relaid, and the range of colours, textures and laying patterns is very wide. A traditional herringbone layout in buff or charcoal suits many older homes, while a linear design in a cooler grey can sit well against a modern property. Permeable blocks are also available if you want rainwater to drain through the surface.

We pass enquiries to block paving installers working across Brighton, Worthing, Eastbourne, Hastings and the rest of the county. Installers quote for full new driveways, extensions, section replacements and repairs. The difference between a drive that lasts and one that sinks or spreads usually comes down to the preparation: the depth and compaction of the sub-base, the edge restraints that hold the blocks in place, and the jointing. When you compare quotes, ask each installer to explain how they will handle each of these.

Drainage needs thinking about from the start, especially on sloping drives or where water already collects. In England, a new or replacement front driveway over 5 square metres needs planning permission unless it uses permeable surfacing or drains to a lawn or border, so standard blocks may need drainage channels or a soakaway. Our guide to driveway planning permission explains the rules, and it is always worth checking with your council before work begins.

Why choose block paving?

Durability

Block paving laid on a well compacted sub-base with firm edge restraints copes well with everyday car use. Because the surface is made of individual units, a damaged block can be lifted and replaced without disturbing the rest of the drive.

Permeable options

Permeable block paving lets rainwater soak through the joints into the ground below. GOV.UK lists permeable concrete block paving as a surface that does not need planning permission for a front driveway, whatever its size.

Variety

Blocks come in a wide range of colours, textures and sizes, from tumbled blocks in buff or charcoal to crisp modern linear styles. Laying patterns such as herringbone or basketweave, and contrasting borders, change the look again.

Repairability

Unlike tarmac or concrete, blocks can be lifted and relaid if the ground beneath settles or a utility company needs to dig. Lifting and relaying an existing drive is also an option when the blocks themselves are still sound.

Kerb appeal

A neatly laid block paved drive with clean edges and a border that suits the house can make the front of a property look much tidier and more finished. The choice of block and pattern lets you match the style of an older home or a newer build.

Straightforward upkeep

Most block paving needs only regular sweeping, weeding of the joints and an occasional clean. Some homeowners also have the drive re-sanded and sealed, which can help resist staining and keep the jointing in place.

Block paving prices

Less.co.uk puts installed block paving at £70 to £120 per square metre, with standard concrete blocks at £70 to £85, permeable blocks at £80 to £110 and natural stone setts at £100 to £150. Its figures cover excavation, sub-base, sand bedding, laying and jointing, but leave out drainage and dropped kerbs. For a whole drive, Less.co.uk gives £2,800 to £4,800 for 40 square metres, with an average of £3,800.

MyJobQuote prices a 60 square metre drive at £4,500 to £6,000 in concrete blocks and £5,000 to £6,500 in brick, including materials, labour and standard groundwork. These are national guide figures rather than Sussex prices, and your own quote will depend on the blocks you choose, the pattern, how much digging out is needed and how easy the site is to reach. Our block paving cost guide sets out the figures in more detail.

Be wary of a quote that is far below the others. Preparing the ground properly is the most labour-intensive part of the job, and a very low price can mean a thin or poorly compacted sub-base, which tends to show up later as sinking and loose blocks. Comparing 3 written quotes side by side makes it much easier to see what each installer is including and to spot the one that does not add up.

Sources for the prices on this page

Frequently asked questions

How much does block paving cost per square metre?+

Less.co.uk (April 2026) puts installed block paving at £70 to £120 per square metre, with standard concrete blocks at £70 to £85, permeable blocks at £80 to £110 and natural stone setts at £100 to £150. Its figures cover excavation, sub-base, sand bedding, laying and jointing, but leave out drainage and dropped kerbs.

How much does a block paved drive for two cars cost?+

MyJobQuote (October 2026) prices a 60 square metre drive at £4,500 to £6,000 in concrete blocks and £5,000 to £6,500 in brick, including materials, labour and standard groundwork. These are national guide figures rather than Sussex prices, so your own quote will depend on the blocks, the pattern and the site.

Does a block paving driveway need planning permission?+

GOV.UK guidance names permeable concrete block paving as a permeable surface, and the Planning Portal says a permeable front driveway of any size does not need permission. Standard blocks laid as an impermeable surface over 5 square metres need permission unless the water drains to a lawn or border, so check with your council.

Can sunken block paving be repaired?+

Yes. Blocks can be lifted and relaid if the ground settles or a utility company needs to dig, and our block paving cost guide quotes MyJobQuote (October 2026) at £20 to £45 per square metre for lift and relay.

How much does it cost to seal block paving?+

MyJobQuote (October 2026) gives block paving sealing at £7 to £15 per square metre, with re-sanding at £2 to £3 per square metre. MyBuilder gives £4 to £8 per square metre to seal only, or £6 to £10 per square metre to re-sand and seal.

Get your free block paving quotes

Fill in the form or call 01273 115520, and up to 3 local installers will be in touch. It is free and there is no obligation.