Resin driveway cost depends mostly on the state of the ground underneath, because laying resin over a sound existing base is a very different job from digging out and starting again. This guide sets out published UK prices per m² and for whole driveways, each credited to its source, so you can judge the quotes you receive.
Price guides quote resin driveways per square metre, but they do not all measure the same thing. Some figures cover the resin surface alone, laid on an existing base, while others include excavation and a new sub-base. Read what each one includes before comparing it with a quote.
MyJobQuote, updated in October 2026, puts a resin driveway at £60 to £95 per m² in total, made up of £40 to £65 for materials and £15 to £30 for labour. Less.co.uk, updated in April 2026, gives supply and fit prices that exclude base preparation unless stated: £40 to £55 per m² for a standard 15mm natural stone resin bound surface and £55 to £70 per m² for a premium 18mm quartz or marble finish. MyBuilder gives an overall average of £60 to £120 per m², rising from £60 to £80 for a basic colour to £100 to £140 for special finishes.
| Type of work | Price per m² | Source |
|---|---|---|
| Resin driveway, materials and labour | £60 to £95 | MyJobQuote (October 2026) |
| Resin bound, standard natural stone, 15mm, base preparation excluded | £40 to £55 | Less.co.uk (April 2026) |
| Resin bound, premium quartz or marble, 18mm, base preparation excluded | £55 to £70 | Less.co.uk (April 2026) |
| Resin bonded on an existing surface | £30 to £50 | Less.co.uk (April 2026) |
| New base preparation (excavation, Type 1 sub-base, edging) | £25 to £45 | Less.co.uk (April 2026) |
| Resin driveway, basic colour | £60 to £80 | MyBuilder |
| Resin driveway, premium design | £80 to £120 | MyBuilder |
| Resin driveway, special finishes | £100 to £140 | MyBuilder |
HomeBuilding.co.uk quotes a resin supplier who gives £80 to £120 per m² for a resin bonded overlay, excluding base preparation, and £180 to £250 per m² for resin bound installed including the base. Those figures are not like for like, but the higher one shows how much a full new base can add. For a rough figure for your own drive, the driveway cost calculator is a good place to start.
Most homeowners want to know what the whole drive will come to. MyJobQuote gives an average resin driveway cost of £4,500 and says most UK homeowners in 2026 pay between £1,800 and £8,000. Its figures by size include labour and are set out below.
Less.co.uk works from a 40m² drive, which it treats as a typical single-car driveway, and prices it at £1,600 to £2,800 for resin bound on an existing base. For the South East it gives £3,400 for a 40m² resin bound drive including base preparation. MyBuilder puts a 100m² resin bound driveway at £6,000 to £10,000, which suits a large drive with room for several cars.
| Size | Materials | Labour | Total | Source |
|---|---|---|---|---|
| 30m² | £1,200 to £2,000 | £600 to £1,000 | £1,800 to £3,000 | MyJobQuote |
| 60m² | £2,400 to £3,800 | £1,100 to £1,700 | £3,500 to £5,500 | MyJobQuote |
| 90m² | £3,400 to £5,400 | £1,600 to £2,600 | £5,000 to £8,000 | MyJobQuote |
MyJobQuote says excavation and sub-base work are not priced in these totals and will add significant costs. Treat them as the price of the surfacing rather than the whole project. A quote for your drive should spell out what is being removed, what goes underneath and what finish is being laid.
The two names sound almost identical but describe different surfaces. A resin bound driveway is made by mixing dried aggregate with resin and trowelling it out to a smooth, even layer, with every stone held within the resin. The result is firm underfoot, has no loose stones and, when it is laid on a suitable base, lets water drain through it.
A resin bonded surface works the other way round. The installer spreads a layer of resin over the base and scatters loose aggregate onto it, so the stones stick to the top and give a textured, gravel-like finish. It is usually laid over an existing hard surface, it does not let water pass through, and some loose stone can come away over time.
On price, Less.co.uk gives resin bonded on an existing surface at £30 to £50 per m², and £1,200 to £2,000 for a 40m² drive. That sits below its resin bound figures. Because water runs off a bonded surface rather than through it, though, you need to plan where it will drain before choosing it for a front driveway.
The single biggest variable in resin driveway prices is whether the resin can go straight onto what you already have. Resin is a surface layer, not a structural one, so it needs a firm, stable base such as sound tarmac or concrete. If the existing drive is cracked, sinking or breaking up, those faults will come through the new surface, and an honest installer will recommend digging it out.
Less.co.uk is the only source in our research that prices both routes for the same size of drive. It gives £1,600 to £2,800 for 40m² of resin bound on an existing base, against £2,600 to £4,600 for the same area on a new base. For a larger 60m² drive on a new base it gives £3,900 to £6,900, and for a small 20m² area on an existing base it gives £800 to £1,400.
Groundwork prices are listed separately by several guides. Less.co.uk gives new base preparation at £25 to £45 per m², removal of an existing surface at £15 to £30 per m² and skip hire at £200 to £350. MyBuilder puts excavation at £10 to £20 per m² and a Type 1 sub-base at £15 to £30 per m², and MyJobQuote gives £800 to £1,800 for removing an old driveway.
Two drives of the same size can be priced quite differently once an installer has seen them. The main factors are listed below. It is worth asking each installer how they have allowed for them.
Shape matters too, because curves, steps and borders take longer to lay neatly than a simple rectangle. It is also reasonable to ask whether the installer uses a UV-stable resin so the colour holds up in sunlight. If a dropped kerb is part of your plans, our dropped kerb cost guide explains the council process.
Permeability is one of the main reasons people choose resin bound, but the surface is only as permeable as what lies under it. Laid over an open, free-draining base, it lets water soak straight through. Laid over solid concrete or old tarmac, it sheds water across the top much like any hard surface, so ask your installer what the base will be.
For front gardens in England, GOV.UK guidance says that if the surface to be covered is more than 5 square metres, planning permission will be needed for traditional impermeable driveways that do not direct water to a permeable area. The Planning Portal says you will not need permission for a new or replacement driveway of any size that uses permeable surfacing, or where rainwater is directed to a lawn or border to drain naturally. These rights apply to houses rather than flats or maisonettes, and they can be restricted in conservation areas, for listed buildings and where an Article 4 Direction applies. Always check with your local planning authority before work starts, because only the council can confirm what applies to your property. Our driveway planning permission advice explains the rules in more detail.
Published prices are a sensible starting point, but the figure that counts is a written quote based on a visit to your property. A good quote says whether the price is for an overlay or a new base, names the aggregate and depth, and lists drainage, edging and waste removal separately. Comparing three quotes on those points makes it easier to spot one that has left something out.
Sussex Driveway puts homeowners in touch with local driveway installers rather than doing the work itself. Fill in our short form or call 01273 115520 and you can get up to 3 free quotes, with no obligation to go ahead. You can also read more about resin driveways and how they are installed.
MyJobQuote puts a resin driveway at £60 to £95 per m² including labour. Less.co.uk gives £40 to £55 per m² for standard resin bound before base preparation, and MyBuilder gives an overall average of £60 to £120 per m². The figure for your drive depends heavily on whether a new base is needed.
MyJobQuote gives £3,500 to £5,500 for a 60m² resin driveway, though it says excavation and sub-base work will add to that. Less.co.uk gives £3,900 to £6,900 for 60m² of resin bound on a new base.
Less.co.uk prices resin bonded on an existing surface at £30 to £50 per m², which is below its resin bound range. Bonded is a different finish, though, with loose stones scattered on a resin coat, and it does not let water drain through.
Often it can, if the existing tarmac or concrete is sound, level and free from serious cracks. If the base is moving or breaking up, the faults will show through the resin, so an installer will usually recommend removing it and laying a new base.
The Planning Portal says a new or replacement front driveway of any size does not need permission if it uses permeable surfacing or drains to a lawn or border. Different rules can apply to flats, conservation areas, listed buildings and areas under an Article 4 Direction, so check with your council first.
Prices are published UK averages and include labour. Every job is different, so the quotes you receive will reflect your own property, access and materials.
Tell us about the job and up to 3 local driveway installers will be in touch with quotes. There is no charge and no obligation. Or call 01273 115520.
We use essential cookies to make this site work. With your permission, we would also like to use Google Analytics cookies to understand how people use the site so we can improve it. We do not use advertising cookies. You can change your mind at any time using the cookie settings button. Read our cookie policy for more information.