Most new front driveways in England do not need planning permission, as long as they are permeable or drain to a permeable area. This guide sets out the driveway planning permission rules as GOV.UK and the Planning Portal publish them, the exceptions to watch for and why a dropped kerb is a separate matter.
The rules changed in 2008 to reduce flooding and pollution from rainwater running off paved front gardens. GOV.UK's guidance on the permeable surfacing of front gardens explains that from 1 October 2008 the permitted development rights for householders changed, and that if the surface to be covered is more than 5 square metres, planning permission will be needed for laying traditional, impermeable driveways that do not provide for the water to run to a permeable area. The Planning Portal uses almost identical wording. In practice, the size of the area only matters if the surface is impermeable and the water has nowhere to soak away.
The legal wording sits in Class F of the permitted development rules for householders, which covers hard surfaces. GOV.UK's technical guidance quotes condition F.2, which applies where the hard surface would be situated on land between a wall forming the principal elevation of the dwellinghouse and a highway, and the area covered or replaced would exceed 5 square metres. In that case, either the hard surface shall be made of porous materials, or provision shall be made to direct run-off water from the hard surface to a permeable or porous area or surface within the curtilage of the dwellinghouse. The principal elevation is usually the front of the house, so this is the rule that applies to most front driveways.
The Planning Portal puts the other side of the rule plainly: you will not need planning permission if a new or replacement driveway of any size uses permeable or porous surfacing, or if the rainwater is directed to a lawn or border to drain naturally. Small front driveways of 5 square metres or less fall outside the condition altogether. A traditional impermeable driveway of more than 5 square metres, with water running straight onto the road or pavement, does need planning permission. Your installer should be able to explain how the water from your new driveway will be dealt with before you agree a price.
GOV.UK describes a permeable surface as any surface that allows water to soak through it. Its examples are permeable or porous surfacing such as gravel, permeable concrete block paving or porous asphalt. Alternatively, a surface does not need to be permeable itself if the rainwater is directed to a lawn or border to drain naturally. Either route satisfies the rule.
Whether a particular product counts depends on how it is made and laid, not just on what it is called. Standard block paving, tarmac and concrete are generally laid as impermeable surfaces, while permeable block paving and porous asphalt are designed to let water through and need a suitable base beneath them. With resin and other surfaces, ask your installer to confirm in writing whether the system they propose is permeable, and if not, how run-off will reach a permeable area. A surface laid over an impermeable base may not drain as intended, so the base matters as much as the top layer.
If you prefer an impermeable surface, the rules allow it without planning permission as long as the run-off is directed to a permeable or porous area within your property. The GOV.UK guidance gives a lawn or border as the simplest example. On a sloping or tightly built plot that may not be practical, and installers then look at options such as a soakaway or a drainage channel feeding into a permeable area. The right solution depends on the ground, the slope and the space available, so it needs to be designed for your site.
Drainage is easy to overlook when comparing quotes, and some driveway price guides list it as a separate extra. Ask each installer how they intend to deal with surface water, and make sure the answer is in the written quote. If you are unsure whether a design meets the rules, your local planning authority can advise. Our driveway cost calculator explains which extras such as drainage sit outside a basic estimate.
These permitted development rights only apply to houses. GOV.UK's technical guidance says they do not apply to any houses which are flats, and that the definition of dwellinghouse does not include buildings containing one or more flats. The Planning Portal likewise says the rights apply to houses, not flats or maisonettes. If you live in a flat or maisonette, assume you will need to talk to your council before laying a new hard surface.
Even for houses, the rights can be limited locally. The Planning Portal mentions areas where there may be a planning condition, Article 4 Direction or other restriction. GOV.UK explains that a local planning authority is allowed to remove permitted development rights in some or all of its area by issuing what is known as an Article 4 Direction. A condition attached to the original planning permission for your home can have a similar effect.
GOV.UK's guidance says that if you live in a conservation area, or certain other designated areas, you may need planning permission for work that would not need it elsewhere. It adds that there are also different requirements if the property is a listed building. Parts of Brighton and Hove and many Sussex towns and villages fall within conservation areas, and the boundaries and any local restrictions vary from place to place. We do not set out specific local rules here, because they differ between councils and can change.
If your home is listed or in a conservation area, contact your local planning authority before you choose a surface or sign a contract. Ask whether permission is needed, whether there is an Article 4 Direction in force and whether there is guidance on materials. Allow time for this in your plans, because a planning application adds weeks to the start date.
Planning permission for the driveway and consent for a dropped kerb are two different things. The Planning Portal says a dropped kerb is required if you wish to drive over a pavement onto your property and that it is illegal to do so without one, and its Interactive House guide says that largely dropped kerbs are not a planning matter but you will need to apply to your local council. It also notes that other work, such as fences, walls, gates or a dropped kerb, may require planning permission. West Sussex County Council says its vehicle crossover process is separate to planning permission and that residents must have both forms of permission as appropriate.
Planning permission is more likely to be needed where the access is onto a classified road. West Sussex County Council says you will require planning permission on any road starting with the letter A, B or C, and East Sussex Highways asks you not to apply for a vehicle crossing until any planning consent you need has been granted. Brighton and Hove City Council says you may need planning permission for a new crossover, access or associated works. Our guide to dropped kerb rules in Sussex covers each council's highway criteria.
The Planning Portal describes its own pages as an introductory guide and not a definitive source of legal information, and the same is true of this one. Although planning permission for driveways is often discussed as a UK-wide topic, the rules above are those published for England, which includes Sussex, and your own circumstances could change the answer. In Brighton and Hove, the city council deals with both planning and dropped kerbs, while in East and West Sussex planning is usually handled by your district or borough council and dropped kerbs by the county council. Check with the right council before work starts, and never assume permission will be granted.
Once you know what is allowed, you can fill in our short form or call 01273 115520 to get up to 3 free quotes from local driveway installers, with no obligation. We connect you with local installers rather than doing the work ourselves. Ask each one to explain how their proposed surface and drainage meet the rules, and see our dropped kerbs page if you also need a crossover.
Not if the new surface is permeable, or if rainwater is directed to a lawn or border to drain naturally. You will need permission for an impermeable surface of more than 5 square metres that does not drain to a permeable area.
Condition F.2 applies to land between the principal elevation of the house and a highway, which usually means the front garden. Other limits can still apply, so check with your council if you are unsure.
Yes. GOV.UK lists gravel as an example of permeable surfacing, alongside permeable concrete block paving and porous asphalt.
No. Permitted development rights for householders apply to houses, not flats or maisonettes, so you should ask your council before laying a new hard surface.
A dropped kerb always needs consent from the highway authority, and it may also need planning permission, for example on A, B and C roads. Check with your council before you apply.
Prices are published UK averages and include labour. Every job is different, so the quotes you receive will reflect your own property, access and materials.
Tell us about the job and up to 3 local driveway installers will be in touch with quotes. There is no charge and no obligation. Or call 01273 115520.
We use essential cookies to make this site work. With your permission, we would also like to use Google Analytics cookies to understand how people use the site so we can improve it. We do not use advertising cookies. You can change your mind at any time using the cookie settings button. Read our cookie policy for more information.